|
|
Build Your Online Product Catalogs?
| Product Name: |
FAG 3211-BD angular contact ball bearing
|
| Supply Ability: |
50000pcs/month |
| Related proudcts |
ball bearing, high quality bearing, bearing manufacturer, |
| Specifications |
FAG 3211-BD |
| Price Term: |
FOB,CIF,EXW |
| Port of loading: |
Qindao |
| Minimum Order |
1pcs |
| Unit Price: |
Negotiable |
|
Single row angular contact ball bearings
Single row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. The raceways of the inner and outer rings are offset in relation to each other in the direction of the bearing axis. The bearings are available in open and sealed versions. Their self-alignment capacity is very small.
Double row angular contact ball bearings
Double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. They correspond in design to single row angular contact ball bearings in pairs in an O arrangement but give a narrower design than these. They differ in the size of their contact angle and the design of the bearing rings.The bearings are available in open and sealed versions. Due to the production technology used, open bearings can still have turned recesses on the outer ring for seals or shields. Sealed bearings are maintenance-free and, as a result, allow particularly economical bearing arrangements. The self-alignment capacity of angular contact ball bearings is very small.
Four point contact bearings
Four point contact bearings are single row angular contact ball bearings and therefore require significantly less ***ce in an axial direction than double row designs.The bearings comprise solid outer rings, split inner rings and ball and cage assemblies with brass or polyamide cages. Due to the two-piece inner rings, a large number of balls can be accommodated. The halves of the inner ring are matched to the specific bearing and must not be interchanged with those of bearings of the same size. The outer ring with the ball and cage assembly can be fitted separately from the halves of the inner ring.
FAG 3211-BD angular contact ball bearing
d 55 mm
D 100 mm
B 33,3 mm
a 58,4 mm
D1 87,8 mm
Da max 91 mm
d1 71,6 mm
da min 64 mm
ra max 1,5 mm
rmin 1,5 mm
¦Á 30 ¡ã |
| Company: |
Jinan Aodin Bearing Co.,Ltd
|
| Contact: |
Ms. Serina Ran |
| Address: |
516 Time Square No.112 Jiefang Road |
| Postcode: |
250013 |
| Tel: |
86-0531-83196910 |
| Fax: |
86-0531-83196910 |
| E-mail: |
|
|
|
|
Home
